NEWS
Effect of HE on the mechanical properties of PLA and PLA composites with diatomaceous earth printed by fused deposition modelling
We co-authored a paper on improving the mechanical properties of 3D printed polylactide (PLA) composites by using diatomaceous earth as a filler and cold hydrostatic extrusion. The results show that with these methods it is possible to almost double the compressive...
Mini-symposium Bioabsorbable in Krakow
A visit to the Institute of Metallurgy and Materials Engineering of the Polish Academy of Sciences in Krakow took place on February 21-22, 2025. The visit was held within the framework of the mini-symposium Bioabsorbable zinc-based materials for bone implants and...
New publication with our co-authorship!
We contributed to an article on precision machining of pure zinc miniature tubes using electrical discharge machining (EDM). The research showed that EDM process parameters have a key influence on the microstructure, surface quality and mechanical properties of the...
Article on the effect of hydrostatuc extrusion on pure copper for use as electrodes
Jacek in the journal Scientific Reports presented an analysis of the effect of plastic deformation using hydrostatic extrusion (HE) on the structural, mechanical and functional properties of pure copper for use as electrodes in in the process of electro discharge...
Next article in Scientific Reports
We have been cooperating with the Institute of Metallurgy and Materials Engineering in Krakow for many years now, and through this cooperation we have achieved interesting results, which we publish successively. Now Mariusz is co-author of the publication by Łukasz...
Article in Scientific Reports
Jacek investigated the effect of the hydrostatic extrusion (HE) process on the machinability of Ti grade 2 (Ti) in the turning process. He published his findings in a high quality scientific journal with IF= 5.516. Read more:...
Article on anisotropy in copper alloys
Sylwia has already dealt with the phenomenon of anisotropy after a hydrostatic extrusion process during her PhD. She has now decided to share her knowledge of anisotropy in CuCrZr copper alloys. We invite you to read more:...
Scientific cooperation between UNIGE and UNIPRESS
We like new challenges and interesting projects, and we recently received an interesting proposal to collaborate with the University of Geneva. We look forward to many years of collaboration and many publications from our work together. We will certainly brag about it.
New articles at Materials
We have been writing a lot of articles recently. Mariusz Kulczyk boasts an article on the effect of plastic strain rate on mechanical and structural properties in pure zinc. In addition, we are collaborating with the Warsaw University of Technology, specifically with...
PhD. Eng. Mariusz Kulczyk Congratulations!
We are pleased to announce that on March 25, 2022, the Scientific Council of the Discipline of Materials Engineering at the Warsaw University of Technology conferred on PhD. Eng. Mariusz Kulczyk, Head of the Laboratory of Plastic Deformation Under High Pressure of IHP...
Highly deformable titanium for implantology applications
Lider XIDr Sylwia Przybysz, Eng. since January 2021 leads the project "Isotropic titanium for biomedical applications after large plastic deformation processes", which received funding from the National Centre for Research and Development in the competition "Leader...
Innovative electrodes for the EDM process with extended service life
PhD. Eng. Jacek Skiba from January 2021 is heading the project "Innovative electrodes for the EDM process with increased service life", which received funding from the National Centre for Research and Development as part of the "Tango IV" competition. The aim of the...
Purchase of Inspekt Duo5 testing machine
As part of the Leader XI project, an Inspekt Duo5 universal testing machine for mini specimens was purchased. Laboratory of Plastic Deformation Under High Pressure often obtains rods with dimensions that make it impossible to produce standard specimens for static...
Poland’s first ECAP process for titanium grade 2
In the framework of the Leader XI project, the first in Poland cold pressing through an axial channel (ECAP) of titanium grade 2 has been carried out. So far, the ECAP process for this material has been carried out only in foreign centres. In this method, the tested...
XIIIth Interdisciplinary Scientific Conference TYGIEL 2021
Our two teammates Sylwia Przybysz and Monika Skorupska had the pleasure to present their research results at the XIII Interdisciplinary Scientific Conference TYGIEL 2021 in the form of an online meeting. The event was attended by more than 550 people representing...
New article in METALLURGICAL AND MATERIALS TRANSACTION A
A new publication in which our colleague Monika Skorupska is a co-author has recently appeared online. Many years of cooperation with the Institute of Metallurgy and Materials Science and Engineering together with the Institute of Fundamental Technological Research...